We have 7 Microcom models in our database, including the 2632, 2636, AD 2651 and AD 2654. Most of them use 10.0.0.2 as the default IP address, and the default login is blank / epicrouter. This page has the default IP address and login for each model we know of.
How to Log In to a Microcom Router
- Connect a computer or phone to the router, with a network cable or over WiFi.
- Type http://10.0.0.2 into your browser's address bar. If nothing loads, try the other addresses in the table below.
- Sign in with the default username and password from the table below (blank / epicrouter is the most common).
Default Microcom IP Addresses
| Microcom Model | IP Address |
| 2632 | 10.0.0.2 |
| 2636 | 10.0.0.2 |
| AD 2651 | 10.0.0.2 |
| AD 2654 | 10.0.0.2 |
| AD 2656 | 10.0.0.2 |
| AD 2706 | 192.168.1.1 |
| deskporte 400 | 10.0.0.2 |
Default Microcom Username and Password
| Microcom Model | Username | Password |
|---|---|---|
| 2632 | admin | epicrouter |
| 2636 | admin | epicrouter |
| AD 2706 | admin | admin |
| deskporte 400 | admin | epicrouter |
Other logins we have seen on Microcom models: admin / epicrouter, admin / admin.
If the Default Login Doesn't Work
Someone has probably changed the password. Check the label on the router, then factory reset it: with the router on, hold the Reset button (often a pinhole, so use a paperclip) for about 10 to 30 seconds, then let go. That puts back the default login above, and also erases your WiFi and Internet settings. See How To Reset Your Router.
More Than Router Guides
To forward ports on a Microcom router, see our sister site: Microcom port forwarding guides on Portforward.com.
Microcom Models We Cover
2632, 2636, AD 2651, AD 2654, AD 2656, AD 2706, deskporte 400