In this article, you will learn how to reset your Motorola MT7711 back to factory settings. Resetting a router is different than rebooting a router. A reboot happens every time a router loses power. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: This is not a step to be taken lightly. The following settings will be changed in your router:
- The router's login credentials are reset.
- All WiFi login information and network names are reset.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- All port forwards, firewall settings, and parental controls that you have configured will be removed.
Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Motorola MT7711 Guides
This is the reset router guide for the Motorola MT7711 7711-5.7.1.43. We also have the following guides for the same router:
Recover Password in Motorola MT7711
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
A router reset should be the last thing you try if you are unable to login.
Reset the Motorola MT7711
Usually there is a reset button located on the back or bottom of a router. A typical reset button looks like this:
Yours may look slightly different, but they are usually tiny. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Remember, this will erase everything you have previously done to this Motorola MT7711 router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Motorola MT7711
Now you need to log in using the factory default username and password. Just follow our MT7711 Login Guide to find all of the information that you need.
Change Your Password
Do not forget to change your router's default password when you log back into it. It's a very bad idea to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other Motorola MT7711 Guides
If you want additional help with your Motorola MT7711 be sure to check out some of our other guides.
This is the reset router guide for the Motorola MT7711 7711-5.7.1.43. We also have the following guides for the same router: