Reset the Motorola SBG901

If you need to reset your Motorola SBG901 router back to factory settings, then this article shows you how. This is not the same thing as rebooting a router. Rebooting a router is simply turning it off and back on again. However, when you reset a router you, return it back to its factory default settings.

Warning: Proceed with caution; resetting your router can be a major headache. When you reset your router, the following will happen.

• The router's login credentials are reset to factory defaults.
• Your WiFi login, password, and network name are reset.
• If your router has any ISP settings they will be removed, and you will have to contact your ISP.
• All port forwards, firewall settings, and parental controls that you have configured will be removed.

Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other Motorola SBG901 Guides

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

• Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
• Make sure that your VPN provider has lots of exit nodes all around the world.
• Check that your VPN will not affect your speed.
• Verify that your VPN provider uses WireGuard as the underlying protocol.
• Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the reset router guide for the Motorola SBG901. We also have the following guides for the same router:

• Motorola SBG901 - How to change the IP Address on a Motorola SBG901 router
• Motorola SBG901 - Motorola SBG901 User Manual
• Motorola SBG901 - Motorola SBG901 Login Instructions
• Motorola SBG901 - Setup WiFi on the Motorola SBG901
• Motorola SBG901 - Information About the Motorola SBG901 Router
• Motorola SBG901 - Motorola SBG901 Screenshots

Recover Password in Motorola SBG901

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the Motorola SBG901

Don't forget to sign up for NordVPN's promo deal before it's gone.

Most of the time you can find a small reset button located on either the back or the bottom of a router. Look at your router and try to find something that looks like this:

Your reset button may look different, but usually they are very small. You may need a paper clip to push the reset button.

Watch the lights on the front of your router and hold the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Remember, this will erase everything you have previously done to this Motorola SBG901 router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Motorola SBG901

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Just follow our SBG901 Login Guide to find all of the information that you need.

Change Your Password

Do not forget to change your router's default password when you log back into it. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.

Other Motorola SBG901 Guides

Here are some of our other Motorola SBG901 guides that you might be interested in.

This is the reset router guide for the Motorola SBG901. We also have the following guides for the same router:

• Motorola SBG901 - How to change the IP Address on a Motorola SBG901 router
• Motorola SBG901 - Motorola SBG901 User Manual
• Motorola SBG901 - Motorola SBG901 Login Instructions
• Motorola SBG901 - Setup WiFi on the Motorola SBG901
• Motorola SBG901 - Information About the Motorola SBG901 Router
• Motorola SBG901 - Motorola SBG901 Screenshots