Reset the Motorola VT1005V

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

If you need to reset your Motorola VT1005V router back to factory settings, then this article shows you how. A router reset is a much bigger deal than a router reboot. Unplugging a router from the wall reboots it. This is different from a reset because a reset completely erases all settings from the router.

Warning: Proceed with caution; resetting your router can be a major headache. The following settings will be changed in your router:

  • The router's login credentials are reset.
  • All WiFi information such as network name, password, and authentication method are erased.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • All port forwards, firewall settings, and parental controls that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router you may want to try recovering your router password with our Router Password Finder.

Other Motorola VT1005V Guides

This is the reset router guide for the Motorola VT1005V. We also have the following guides for the same router:

Recover Password in Motorola VT1005V

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

If you are unable to recover your lost router password, then you may have to proceed with a full router reset.

Reset the Motorola VT1005V

On most routers you can find a small button on the back or the bottom labeled reset. What you are looking for is something that looks like this:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Hold the reset button down for 10 seconds and watch the lights. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Just don't forget that this will totally reset your Motorola VT1005V router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Motorola VT1005V

After you are finished resetting your router, you need to login in using the original factory username and password. We have a VT1005V Login Guide with all this information ready for you.

Change Your Password

Do not forget to change your router's default password when you log back into it. Leaving a router password set to default is a very serious security risk. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.

Other Motorola VT1005V Guides

Here are some of our other Motorola VT1005V guides that you might be interested in.

This is the reset router guide for the Motorola VT1005V. We also have the following guides for the same router: