NetComm modem routers usually use 192.168.1.1. NetComm 3G and 4G gateways usually use 192.168.20.1.
Every Known NetComm Default IP Address
| Netcomm Model | IP Address |
| 3G10WVT | 10.0.0.138 |
| 3G21WB | 10.0.0.138 |
| 3G36W-V | 192.168.20.1 |
| 3G42W-MB | 10.0.0.138 |
| 3G42W-MB | 192.168.1.1 |
| 3G42WT | 10.0.0.138 |
| 3G9WB | 10.0.0.138 |
| 3G9WB | 192.168.1.1 |
| 4G100W | 192.168.10.50 |
| 4G100W | 192.168.20.1 |
| MyZone 3G24W | 192.168.1.1 |
| MyZone 3G24W | 192.168.10.50 |
| N900 | 192.168.20.1 |
| nb1 | 192.168.1.1 |
| NB1300 ADSL | 192.168.1.1 |
| NB1300 PLUS 4 | 192.168.1.1 |
| NB14WN | 192.168.1.1 |
| NB2800 | 192.168.1.1 |
| NB3 | 192.168.1.1 |
| NB3000 | 192.168.1.1 |
| NB304N | 192.168.1.1 |
| NB3100 | 192.168.1.1 |
| NB3100C | 192.168.1.1 |
| NB3200 | 192.168.1.1 |
| NB3300 | 192.168.1.1 |
| NB4 | 192.168.1.1 |
| NB5 | 192.168.1.1 |
| NB5 Plus 4 | 192.168.1.1 |
| NB5 Plus 4W | 192.168.1.1 |
| NB5540 | 192.168.1.1 |
| NB5580W | 192.168.1.1 |
| NB6 Plus 4 | 192.168.1.1 |
| NB6 PLUS 4W | 192.168.1.1 |
| NB600W | 192.168.1.1 |
| NB604N | 192.168.1.1 |
| NB6W | 192.168.1.1 |
| NB7 | 192.168.1.1 |
| NB9W | 192.168.1.1 |
| NB9WMAXX | 192.168.1.1 |
| NF10W | 192.168.20.1 |
| NF10WV | 192.168.20.1 |
| NF12 | 192.168.1.1 |
| NF15ACV | 192.168.20.1 |
| NF17ACV | 192.168.20.1 |
| NF18ACV | 192.168.1.1 |
| NF18ACV | 192.168.20.1 |
| NF1ADV | 192.168.1.1 |
| NF2 | 192.168.20.1 |
| NF2 N900 | 192.168.20.1 |
| NF20MESH | 192.168.20.1 |
| NF3ADV | 192.168.1.1 |
| NF3ADV | 192.168.20.1 |
| NF4V | 192.168.20.1 |
| NF4V Orcon | 192.168.0.1 |
| NF4V Orcon | 192.168.20.1 |
| NP803n | 192.168.20.1 |
| NP805N | 192.168.20.1 |
| NP805N 11n | 192.168.20.1 |
| NW5580W | 192.168.1.1 |
| SM4300 | 192.168.1.1 |
| Wireless N300 | 192.168.20.1 |
Find Your Router's IP Address
Run ipconfig on Windows and read Default Gateway, or see How To Find Your Router's IP Address.
Change the Router's IP Address
Log in and go to Advanced Setup > LAN (or Basic Setup > LAN, or Advanced > Local Area Network on 3G/4G gateways). Change the IP Address, then click Apply/Save.
