In this article, you will learn how to reset your Netgear AC810S back to factory settings. This is not the same thing as rebooting a router. A reboot happens every time a router loses power. However, when you reset a router you, return it back to its factory default settings.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. When you reset your router, the following will happen.
- The router's login and password are reset to factory defaults.
- All WiFi information such as network name, password, and authentication method are erased.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- Any port forwards, firewall settings, or parental controls that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Netgear AC810S Guides
This is the reset router guide for the Netgear AC810S. We also have the following guides for the same router:
Recover Password in Netgear AC810S
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
A router reset should be the last thing you try if you are unable to login.
Reset the Netgear AC810S
Usually there is a reset button located on the back or bottom of a router. Look for something that looks like this:
Reset buttons are usually tiny. Yours may look slightly different than this. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Hold the reset button down for 10 seconds and watch the lights. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. It is harmless to hold the reset button too long.
Just don't forget that this will totally reset your Netgear AC810S router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Netgear AC810S
Once the reset is complete, you need to login to your router using the default IP address, username, and password. Our AC810S Login Guide has all of the information that you need.
Change Your Password
After logging in, you should really change your router's password for added security. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other Netgear AC810S Guides
This isn't our only Netgear AC810S guide. We also have the following guides for this router.
This is the reset router guide for the Netgear AC810S. We also have the following guides for the same router: