In this article, you will learn how to reset your Netgear C6300v2 back to factory settings. A router reset is very different than a router reboot. Turning a router off and back on again causes a reboot. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: Before you proceed, there are a few things you need to know. When you reset your router, the following will happen.
- The router's username and password are reset to factory defaults.
- All WiFi information such as network name, password, and authentication method are erased.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- Any firewall settings, parental controls, and port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router you may want to try recovering your router password with our Router Password Finder.
Other Netgear C6300v2 Guides
Use a VPN
Have you considered using a VPN when you connect to the internet? A VPN is a great way to increase your security and anonymity while surfing.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes securely sharing your home network super simple. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
This is the reset router guide for the Netgear C6300v2 v1.03.06. We also have the following guides for the same router:
Recover Password in Netgear C6300v2
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
A router reset should be the last thing you try if you are unable to login.
Reset the Netgear C6300v2
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
You can usually find a small reset button on either the back or the bottom of a router. A typical reset button looks like this:
Your reset button may look different, but usually they are very small. You may need a paper clip to push the reset button.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. You can hold the button down as long as you like, it will not hurt anything.
Don't forget, this step will totally reset your Netgear C6300v2 router back to factory settings.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Netgear C6300v2
Now you need to log in using the factory default username and password. We have a C6300v2 Login Guide with all this information ready for you.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other Netgear C6300v2 Guides
This isn't our only Netgear C6300v2 guide. We also have the following guides for this router.
This is the reset router guide for the Netgear C6300v2 v1.03.06. We also have the following guides for the same router: