This page shows how to change the LAN IP Address on the Netgear CG3100D-2 router.
Other Netgear CG3100D-2 Guides
This is the ip address guide for the Netgear CG3100D-2. We also have the following guides for the same router:
- Netgear CG3100D-2 - Netgear CG3100D-2 User Manual
- Netgear CG3100D-2 - Netgear CG3100D-2 Login Instructions
- Netgear CG3100D-2 - How to change the DNS settings on a Netgear CG3100D-2 router
- Netgear CG3100D-2 - Setup WiFi on the Netgear CG3100D-2
- Netgear CG3100D-2 - Information About the Netgear CG3100D-2 Router
- Netgear CG3100D-2 - Netgear CG3100D-2 Screenshots
- Netgear CG3100D-2 - Reset the Netgear CG3100D-2
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Netgear CG3100D-2
To get started configuring the Netgear CG3100D-2 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Netgear CG3100D-2, follow our Netgear CG3100D-2 Login Guide.
Change the LAN IP Address on a Netgear CG3100D-2
If you followed our login guide above then you should see this screen.
When you have logged into the Netgear CG3100D-2 you are taken to the Status page. To change the LAN IP Address, the address you see when inside your network, scroll down the dark blue side-bar on the left and click Advanced then LAN IP.
Configure the LAN section of your Netgear CG3100D-2
You are now on the correct page to change your Local Area Network IP address. Next to the words LAN IP Address are four boxes. Enter your new address in these boxes. One good choice for a new address is 192.168.1.1
Click Apply when you have finished. We highly recommend that you don't change anything else on this page.
Congratulations, you've changed your Router's IP Address!
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Netgear CG3100D-2 Info
Don't forget about our other Netgear CG3100D-2 info that you might be interested in.
This is the ip address guide for the Netgear CG3100D-2. We also have the following guides for the same router:
- Netgear CG3100D-2 - Netgear CG3100D-2 User Manual
- Netgear CG3100D-2 - Netgear CG3100D-2 Login Instructions
- Netgear CG3100D-2 - How to change the DNS settings on a Netgear CG3100D-2 router
- Netgear CG3100D-2 - Setup WiFi on the Netgear CG3100D-2
- Netgear CG3100D-2 - Information About the Netgear CG3100D-2 Router
- Netgear CG3100D-2 - Netgear CG3100D-2 Screenshots
- Netgear CG3100D-2 - Reset the Netgear CG3100D-2