This page shows how to change the LAN IP Address on the Netgear D7800 router.
Other Netgear D7800 Guides
This is the ip address guide for the Netgear D7800. We also have the following guides for the same router:
- Netgear D7800 - Netgear D7800 Login Instructions
- Netgear D7800 - Netgear D7800 User Manual
- Netgear D7800 - How to change the DNS settings on a Netgear D7800 router
- Netgear D7800 - Setup WiFi on the Netgear D7800
- Netgear D7800 - Netgear D7800 Screenshots
- Netgear D7800 - Information About the Netgear D7800 Router
- Netgear D7800 - Reset the Netgear D7800
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Netgear D7800
To get started configuring the Netgear D7800 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Netgear D7800, follow our Netgear D7800 Login Guide.
Change the LAN IP Address on a Netgear D7800
If you followed our login guide above then you should see this screen.
Once you've logged into the Netgear D7800 router you should be taken to the Home page. To change your IP address click the Advanced tab near the top of the page. From there click Setup located in the left hand sidebar and then LAN Setup just beneath that.
Configure the LAN section of your Netgear D7800
You should be taken to the page presented above.
On this new page enter your desired IP Address into the provided boxes. Don't know what you should change it to? One good option to try is 10.0.0.1
Just below that is the IP Subnet Mask. This needs to be left as it is. Be sure to leave it at 255.255.255.0
That's it! You're finished. Just don't forget to click Apply near the top of the page before leaving.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Netgear D7800 Info
Don't forget about our other Netgear D7800 info that you might be interested in.
This is the ip address guide for the Netgear D7800. We also have the following guides for the same router:
- Netgear D7800 - Netgear D7800 Login Instructions
- Netgear D7800 - Netgear D7800 User Manual
- Netgear D7800 - How to change the DNS settings on a Netgear D7800 router
- Netgear D7800 - Setup WiFi on the Netgear D7800
- Netgear D7800 - Netgear D7800 Screenshots
- Netgear D7800 - Information About the Netgear D7800 Router
- Netgear D7800 - Reset the Netgear D7800