How to change the IP Address on a Netgear DGFV338 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Netgear DGFV338 router.

Other Netgear DGFV338 Guides

This is the ip address guide for the Netgear DGFV338.We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Netgear DGFV338

To get started configuring the Netgear DGFV338 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Netgear DGFV338, follow our Netgear DGFV338 Login Guide.

Change the LAN IP Address on a Netgear DGFV338

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Netgear router.

To change your IP Address, the address you see from inside your network, follow these steps:

1. Log into the Netgear DGFV338. This places you on the Router Status page.

2. Click the choice at the top of the page in orange, labeled Network Configuration.

3. Choose the choice below the orange bar labeled LAN Setup.

4. Make sure that LAN Setup is chosen in the third group of choices.

Configure the LAN section of your Netgear DGFV338

router setup
This is the setup page from your Netgear router.

Under the heading of LAN TCP/IP Setup, place your cursor in the first of four boxes labeled IP Address. Enter the new address you have chosen for your Router. One good recommendation would be to use the address of 192.168.1.1 like the one in this screenshot.

Don't change the Subnet Mask, this should remain at 255.255.255.0

Click the yellow button at the bottom end of the page, labeled Apply.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Netgear DGFV338 Info

Don't forget about our other Netgear DGFV338 info that you might be interested in.

This is the ip address guide for the Netgear DGFV338.We also have the following guides for the same router: