If you need to reset your Netgear DM111Pv2 router back to factory settings, then this article shows you how. A router reset is a much bigger deal than a router reboot. Every time your router loses power it reboots. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: This is not a step to be taken lightly. A router reset will affect the following settings:
- The router's login credentials are reset to factory defaults.
- All WiFi login information and network names are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
A router reset is the last step you should take in recovering your router's password. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Netgear DM111Pv2 Guides
This is the reset router guide for the Netgear DM111Pv2. We also have the following guides for the same router:
Recover Password in Netgear DM111Pv2
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the Netgear DM111Pv2
On most routers you can find a small button on the back or the bottom labeled reset. Most reset buttons look like this:
Reset buttons are usually tiny. Yours may look slightly different than this. You may need a paper clip to push the reset button.
Hold the reset button down for 10 seconds and watch the lights. After a few seconds the lights should blink differently. When this happens, the reset is complete. You can hold the button down as long as you like, it will not hurt anything.
Don't forget, this step will totally reset your Netgear DM111Pv2 router back to factory settings.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Netgear DM111Pv2
Once the reset is complete, you need to login to your router using the default IP address, username, and password. We have a DM111Pv2 Login Guide with all this information ready for you.
Change Your Password
After logging in, you should really change your router's password for added security. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other Netgear DM111Pv2 Guides
If you want additional help with your Netgear DM111Pv2 be sure to check out some of our other guides.
This is the reset router guide for the Netgear DM111Pv2. We also have the following guides for the same router: