Setup Router logo in white Setup router name logo in white
Get Software

Reset the Netgear FVG318

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This is the reset guide for the Netgear FVG318 router. A router reset is very different than a router reboot. A reboot happens every time a router loses power. This is different from a reset because a reset completely erases all settings from the router.

Warning: Proceed with caution; resetting your router can be a major headache. A router reset will affect the following settings:

  • The router's username and password are reset to factory defaults.
  • Your WiFi login, password, and network name are reset.
  • Any ISP settings saved in your router will be removed. You may have to contact your ISP.
  • All parental controls, firewall settings, and port forwards will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Netgear FVG318 Guides

This is the reset router guide for the Netgear FVG318. We also have the following guides for the same router:

Recover Password in Netgear FVG318

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.

Reset the Netgear FVG318

Most routers have a small button on either the back or the bottom. Look for something that looks like this:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The lights on the front of the router should do something different when the reset happens. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.

Don't forget, this step will totally reset your Netgear FVG318 router back to factory settings.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Netgear FVG318

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can find all of the information that you need in our FVG318 Login Guide.

Change Your Password

Do not forget to change your router's default password when you log back into it. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other Netgear FVG318 Guides

We have collected a lot of information about the Netgear FVG318 router. You can find some of our additional content here.

This is the reset router guide for the Netgear FVG318. We also have the following guides for the same router: