This page shows how to change the LAN IP Address on the Netgear FVL328 router.
Other Netgear FVL328 Guides
This is the ip address guide for the Netgear FVL328. We also have the following guides for the same router:
- Netgear FVL328 - Reset the Netgear FVL328
- Netgear FVL328 - Netgear FVL328 User Manual
- Netgear FVL328 - Netgear FVL328 Login Instructions
- Netgear FVL328 - How to change the DNS settings on a Netgear FVL328 router
- Netgear FVL328 - Information About the Netgear FVL328 Router
- Netgear FVL328 - Netgear FVL328 Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Netgear FVL328
To get started configuring the Netgear FVL328 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Netgear FVL328, follow our Netgear FVL328 Login Guide.
Change the LAN IP Address on a Netgear FVL328
If you followed our login guide above then you should see this screen.
When you have decided to change your IP Address, the address you can see from inside your network, first log into the Netgear FVL328. This takes you to the Router Status page. Next, scroll down the dark blue side bar until you see the choice of LAN IP Setup. After clicking this, it takes you to the page labeled LAN IP Setup.
Configure the LAN section of your Netgear FVL328
Under the first heading of LAN TCP/IP Setup, there are four boxes in a row separated by dots, labeled IP Address. This is where you need to enter your new address you have chosen for your Router. One good choice is the address you see in this screenshot, another would be 192.168.1.1
When making this change to your Netgear Router, make sure you don't change the Subnet Mask, this should remain at 255.255.255.0
When you have finished, click the Apply button, at the bottom of the page.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Netgear FVL328 Info
Don't forget about our other Netgear FVL328 info that you might be interested in.
This is the ip address guide for the Netgear FVL328. We also have the following guides for the same router:
- Netgear FVL328 - Reset the Netgear FVL328
- Netgear FVL328 - Netgear FVL328 User Manual
- Netgear FVL328 - Netgear FVL328 Login Instructions
- Netgear FVL328 - How to change the DNS settings on a Netgear FVL328 router
- Netgear FVL328 - Information About the Netgear FVL328 Router
- Netgear FVL328 - Netgear FVL328 Screenshots