Setup Router logo in white Setup router name logo in white
Get Software

Reset the Netgear FVS336G

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

This article covers how to reset the Netgear FVS336G router back to factory default settings. A router reset is a much bigger deal than a router reboot. Unplugging a router from the wall reboots it. This is different from a reset because a reset completely erases all settings from the router.

Warning: This is not a step to be taken lightly. When you reset your router, the following will happen.

  • The router's login credentials are reset to factory defaults.
  • All WiFi settings are reset, including network name and password.
  • Your ISP username and password will be reset, and you may have to contact your ISP.
  • All parental controls, firewall settings, and port forwards will be removed.

Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Netgear FVS336G Guides

This is the reset router guide for the Netgear FVS336G v2. We also have the following guides for the same router:

Recover Password in Netgear FVS336G

Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Only after you have tried to recover your missing router username and password should you perform a full router reset.

Reset the Netgear FVS336G

Most routers have a small button on either the back or the bottom. This is what a typical reset button looks like:

Router Reset Button

Your reset button may look different, but usually they are very small. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The lights on the front of the router should do something different when the reset happens. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Remember, this will totally reset your Netgear FVS336G router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Netgear FVS336G

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. We have a FVS336G Login Guide with all this information ready for you.

Change Your Password

Be sure to change your router's default password after you get logged back in. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other Netgear FVS336G Guides

We have collected a lot of information about the Netgear FVS336G router. You can find some of our additional content here.

This is the reset router guide for the Netgear FVS336G v2. We also have the following guides for the same router: