This guide shows you how to reset your Netgear Nighthawk MR1100 router to factory default settings. This is not the same thing as rebooting a router. Unplugging a router from the wall reboots it. However, when you reset a router you, return it back to its factory default settings.
Warning: This is not a step to be taken lightly. The following settings in your router will be changed:
- The router's login and password are reset.
- All WiFi login information and network names are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any firewall settings, parental controls, and port forwards that you have configured will be removed.
A router reset is the last step you should take in recovering your router's password. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other Netgear Nighthawk MR1100 Guides
This is the reset router guide for the Netgear Nighthawk MR1100 NTG9X50C_12.05.05.00 AT&T. We also have the following guides for the same router:
Recover Password in Netgear Nighthawk MR1100
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the Netgear Nighthawk MR1100
There is usually a small reset button located on either the back or the bottom of a router. This is what a typical reset button looks like:
Reset buttons are usually tiny. Yours may look slightly different than this. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. The lights on the front of the router should do something different when the reset happens. Do not worry about holding the button down too long; this is harmless.
Just don't forget that this will totally reset your Netgear Nighthawk MR1100 router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Netgear Nighthawk MR1100
After you are finished resetting your router, you need to login in using the original factory username and password. You can find all of the information that you need in our Nighthawk MR1100 Login Guide.
Change Your Password
Do not forget to change your router's default password when you log back into it. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: Put your new password on a post-in note and stick it to the bottom of your router.
Other Netgear Nighthawk MR1100 Guides
If you want additional help with your Netgear Nighthawk MR1100 be sure to check out some of our other guides.
This is the reset router guide for the Netgear Nighthawk MR1100 NTG9X50C_12.05.05.00 AT&T. We also have the following guides for the same router: