This is the reset guide for the Netgear Nighthawk RAX48 router. Resetting a router is different than rebooting a router. A reboot happens every time a router loses power. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: This is not a step to be taken lightly. When you reset your router, the following will happen.
- The router's login credentials are reset to factory defaults.
- All WiFi login information and network names are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any parental controls, firewall settings, or port forwards will be removed.
A router reset is the last step you should take in recovering your router's password. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other Netgear Nighthawk RAX48 Guides
This is the reset router guide for the Netgear Nighthawk RAX48 v1.0.11.112_2.0.77. We also have the following guides for the same router:
Recover Password in Netgear Nighthawk RAX48
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the Netgear Nighthawk RAX48
On most routers you can find a small button on the back or the bottom labeled reset. Look at your router and try to find something that looks like this:
Reset buttons are usually tiny. Yours may look slightly different than this. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. The blinking pattern of the lights on the front of the router should change when the reset is complete. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Don't forget, this step will totally reset your Netgear Nighthawk RAX48 router back to factory settings.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the Netgear Nighthawk RAX48
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Our Nighthawk RAX48 Login Guide has all of the information that you need.
Change Your Password
After logging in, you should really change your router's password for added security. Leaving a router password set to default is a very serious security risk. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other Netgear Nighthawk RAX48 Guides
We have collected a lot of information about the Netgear Nighthawk RAX48 router. You can find some of our additional content here.
This is the reset router guide for the Netgear Nighthawk RAX48 v1.0.11.112_2.0.77. We also have the following guides for the same router: