Setup Router logo in white Setup router name logo in white
Get Software

Reset the Netgear Nighthawk X10 R9000

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 5 minutes

This guide shows you how to reset your Netgear Nighthawk X10 R9000 router. A router reset is very different than a router reboot. Unplugging a router from the wall reboots it. However, when you reset a router you, return it back to its factory default settings.

Warning: Since this erases everything you have done to the router, there are some things you need to consider first. A router reset will affect the following settings:

  • The router's username and password are reset.
  • All WiFi settings are reset, including network name and password.
  • Any ISP settings saved in your router will be removed. You may have to contact your ISP.
  • Any parental controls, firewall settings, or port forwards will be removed.

A router reset is the last step you should take in recovering your router's password. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Netgear Nighthawk X10 R9000 Guides

This is the reset router guide for the Netgear Nighthawk X10 R9000 v1.0.5.26. We also have the following guides for the same router:

Recover Password in Netgear Nighthawk X10 R9000

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

If you are unable to recover your lost router password, then you may have to proceed with a full router reset.

Reset the Netgear Nighthawk X10 R9000

Most routers have a small button on either the back or the bottom. Most reset buttons look like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Hold the reset button down for 10 seconds and watch the lights. The lights on the front of the router should do something different when the reset happens. Do not be concerned about holding the reset button down too long. It will not hurt anything.

Remember, this will erase everything you have previously done to this Netgear Nighthawk X10 R9000 router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Netgear Nighthawk X10 R9000

Once the reset is complete, you need to login to your router using the default IP address, username, and password. We have a Nighthawk X10 R9000 Login Guide with all this information ready for you.

Change Your Password

After logging in, you should really change your router's password for added security. The factory default passwords for routers are very well known. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other Netgear Nighthawk X10 R9000 Guides

This isn't our only Netgear Nighthawk X10 R9000 guide. We also have the following guides for this router.

This is the reset router guide for the Netgear Nighthawk X10 R9000 v1.0.5.26. We also have the following guides for the same router: