This guide shows you how to reset your Netgear Orbi LBR20 router. This is a much bigger deal than a router reboot. Rebooting a router is simply turning it off and back on again. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: This is not a step to be taken lightly. When you reset your router, the following will happen.
- The router's username and password are reset.
- All WiFi settings are reset, including network name and password.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Netgear Orbi LBR20 Guides
This is the reset router guide for the Netgear Orbi LBR20 v2.6.5.32. We also have the following guides for the same router:
Recover Password in Netgear Orbi LBR20
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the Netgear Orbi LBR20
Usually there is a reset button located on the back or bottom of a router. A typical reset button looks like this:
Even though yours may look slightly different, you need to look for a tiny button. You may need a paper clip to push the reset button.
Hold the reset button down for 10 seconds and watch the lights. The lights on the front of the router should do something different when the reset happens. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.
Remember, this will erase everything you have previously done to this Netgear Orbi LBR20 router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Netgear Orbi LBR20
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. Our Orbi LBR20 Login Guide has all of the information that you need.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. The factory default passwords for routers are very well known. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other Netgear Orbi LBR20 Guides
This isn't our only Netgear Orbi LBR20 guide. We also have the following guides for this router.
This is the reset router guide for the Netgear Orbi LBR20 v2.6.5.32. We also have the following guides for the same router: