If you need to reset your Netgear Orbi RBR10 router back to factory settings, then this article shows you how. A router reset is a much bigger deal than a router reboot. A reboot happens every time a router loses power. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: Proceed with caution; resetting your router can be a major headache. The following settings in your router will be changed:
- The router's login and password are reset to factory defaults.
- Your WiFi login, password, and network name are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any port forwards, firewall settings, or parental controls that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other Netgear Orbi RBR10 Guides
This is the reset router guide for the Netgear Orbi RBR10 v2.6.2.104. We also have the following guides for the same router:
Recover Password in Netgear Orbi RBR10
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the Netgear Orbi RBR10
Most of the time you can find a small reset button located on either the back or the bottom of a router. A typical reset button looks like this:
Even though yours may look slightly different, you need to look for a tiny button. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. You can hold the button down as long as you like, it will not hurt anything.
Don't forget, this step will totally reset your Netgear Orbi RBR10 router back to factory settings.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the Netgear Orbi RBR10
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can follow the Orbi RBR10 Login Guide to find everything that you need to log in.
Change Your Password
Do not forget to change your router's default password when you log back into it. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other Netgear Orbi RBR10 Guides
Here are some of our other Netgear Orbi RBR10 guides that you might be interested in.
This is the reset router guide for the Netgear Orbi RBR10 v2.6.2.104. We also have the following guides for the same router: