This guide shows you how to reset your Netgear RAX35 router. This is a much bigger deal than a router reboot. Every time your router loses power it reboots. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: Make sure that you fully understand the following before resetting your router. When you reset your router, the following will happen.
- The router's login credentials are reset.
- All WiFi information such as network name, password, and authentication method are erased.
- Any ISP settings saved in your router will be removed. You may have to contact your ISP.
- Any parental controls, firewall settings, or port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router you may want to try recovering your router password with our Router Password Finder.
Other Netgear RAX35 Guides
This is the reset router guide for the Netgear RAX35 v1.0.3.62_1.0.1. We also have the following guides for the same router:
Recover Password in Netgear RAX35
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the Netgear RAX35
On most routers you can find a small button on the back or the bottom labeled reset. Look at your router and try to find something that looks like this:
Even though yours may look slightly different, you need to look for a tiny button. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Just don't forget that this will totally reset your Netgear RAX35 router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Netgear RAX35
Now you need to log in using the factory default username and password. You can find all of the information that you need in our RAX35 Login Guide.
Change Your Password
After logging in, you should really change your router's password for added security. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other Netgear RAX35 Guides
This isn't our only Netgear RAX35 guide. We also have the following guides for this router.
This is the reset router guide for the Netgear RAX35 v1.0.3.62_1.0.1. We also have the following guides for the same router: