This page shows how to change the LAN IP Address on the NetMaster CBW-560 router.
Other NetMaster CBW-560 Guides
This is the ip address guide for the NetMaster CBW-560. We also have the following guides for the same router:
- NetMaster CBW-560 - NetMaster CBW-560 User Manual
- NetMaster CBW-560 - NetMaster CBW-560 Login Instructions
- NetMaster CBW-560 - Setup WiFi on the NetMaster CBW-560
- NetMaster CBW-560 - Information About the NetMaster CBW-560 Router
- NetMaster CBW-560 - NetMaster CBW-560 Screenshots
- NetMaster CBW-560 - Reset the NetMaster CBW-560
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The NetMaster CBW-560
To get started configuring the NetMaster CBW-560 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the NetMaster CBW-560, follow our NetMaster CBW-560 Login Guide.
Change the LAN IP Address on a NetMaster CBW-560
If you followed our login guide above then you should see this screen.
When you have finished logging into the NetMaster CBW-560 you start on the Status page. To change your IP Address, the address you see while inside your private network, click the choice labeled Basic. Then, make sure that Setup on the left is highlighted.
Configure the LAN section of your NetMaster CBW-560
On this new page under the heading of Network Configuration, place your cursor in the first of four boxes labeled IP Address. Enter the address you have picked out for your Router in these boxes. We suggest the address of 192.168.1.1
Click the Apply button when you have finished making changes to your Router.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other NetMaster CBW-560 Info
Don't forget about our other NetMaster CBW-560 info that you might be interested in.
This is the ip address guide for the NetMaster CBW-560. We also have the following guides for the same router:
- NetMaster CBW-560 - NetMaster CBW-560 User Manual
- NetMaster CBW-560 - NetMaster CBW-560 Login Instructions
- NetMaster CBW-560 - Setup WiFi on the NetMaster CBW-560
- NetMaster CBW-560 - Information About the NetMaster CBW-560 Router
- NetMaster CBW-560 - NetMaster CBW-560 Screenshots
- NetMaster CBW-560 - Reset the NetMaster CBW-560