In this article, you will learn how to reset your Nucom NC-WR644GACV back to factory settings. A router reset is a much bigger deal than a router reboot. Turning a router off and back on again causes a reboot. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: Proceed with caution; resetting your router can be a major headache. The following settings in your router will be changed:
- The router's login credentials are reset.
- All WiFi information such as network name, password, and authentication method are erased.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Nucom NC-WR644GACV Guides
This is the reset router guide for the Nucom NC-WR644GACV WR644GACVSTA003. We also have the following guides for the same router:
Recover Password in Nucom NC-WR644GACV
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the Nucom NC-WR644GACV
You can usually find a small reset button on either the back or the bottom of a router. Most reset buttons look like this:
Yours may look slightly different, but they are usually tiny. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The lights on the front of the router should do something different when the reset happens. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Remember, this will erase everything you have previously done to this Nucom NC-WR644GACV router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Nucom NC-WR644GACV
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can follow the NC-WR644GACV Login Guide to find everything that you need to log in.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. Leaving a router password set to default is a very serious security risk. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other Nucom NC-WR644GACV Guides
This isn't our only Nucom NC-WR644GACV guide. We also have the following guides for this router.
This is the reset router guide for the Nucom NC-WR644GACV WR644GACVSTA003. We also have the following guides for the same router: