We have 4 Origo models in our database: the ASR-8100, ASR-8400, AWR-8210 and BRP-1400. Most of them use 10.0.0.2 as the default IP address, and the default login is admin / epicrouter. This page has the default IP address and login for each model we know of.
How to Log In to an Origo Router
- Connect a computer or phone to the router, with a network cable or over WiFi.
- Type http://10.0.0.2 into your browser's address bar. If nothing loads, try the other addresses in the table below.
- Sign in with the default username and password from the table below (admin / epicrouter is the most common).
Default Origo IP Addresses
| Origo Model | IP Address |
| ASR-8100 | 10.0.0.2 |
| ASR-8400 | 10.0.0.2 |
| AWR-8210 | 10.0.0.2 |
| BRP-1400 | 192.168.1.1 |
Default Origo Username and Password
| Origo Model | Username | Password |
|---|---|---|
| ASR-8400 | admin | epicrouter |
Other logins we have seen on Origo models: blank / admin.
If the Default Login Doesn't Work
Someone has probably changed the password. Check the label on the router, then factory reset it: with the router on, hold the Reset button (often a pinhole, so use a paperclip) for about 10 to 30 seconds, then let go. That puts back the default login above, and also erases your WiFi and Internet settings. See How To Reset Your Router.
More Than Router Guides
To forward ports on an Origo router, see our sister site: Origo port forwarding guides on Portforward.com.
Origo Models We Cover
ASR-8100, ASR-8400, AWR-8210, BRP-1400