If you need to reset your Pace Plc 3801HGV router back to factory settings, then this article shows you how. Resetting a router is different than rebooting a router. Rebooting a router is simply turning it off and back on again. This is different from a reset because a reset completely erases all settings from the router.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. A router reset will affect the following settings:
- The router's login and password are reset to factory defaults.
- All WiFi login information and network names are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- All port forwards, firewall settings, and parental controls that you have configured will be removed.
Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Pace Plc 3801HGV Guides
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
This is the reset router guide for the Pace Plc 3801HGV. We also have the following guides for the same router:
Recover Password in Pace Plc 3801HGV
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the Pace Plc 3801HGV
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
Most of the time you can find a small reset button located on either the back or the bottom of a router. Look for something that looks like this:
Your reset button may look different, but usually they are very small. You may need a paper clip to push the reset button.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. The lights on the front of the router should do something different when the reset happens. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.
Just don't forget that this will totally reset your Pace Plc 3801HGV router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Pace Plc 3801HGV
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. You can follow the 3801HGV Login Guide to find everything that you need to log in.
Change Your Password
You need to change your router's default password after you log in for the first time. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other Pace Plc 3801HGV Guides
Here are some of our other Pace Plc 3801HGV guides that you might be interested in.
This is the reset router guide for the Pace Plc 3801HGV. We also have the following guides for the same router: