Pass and Seymour Router Login and Default Password

Thumbnail image of Setup Router Staff
Setup Router Staff
November 02, 2022 (Last Updated: ) | Reading Time: 1 minutes

We have one Pass and Seymour model in our database, the CNR-7562V. It uses 192.168.1.1 as the default IP address, and the default login is blank / blank. Its default settings are below.

How to Log In to the Pass and Seymour CNR-7562V

  1. Connect a computer or phone to the router, with a network cable or over WiFi.
  2. Type http://192.168.1.1 into your browser's address bar. If nothing loads, see How To Find Your Router's IP Address.
  3. Sign in with the default username and password from the table below (blank / blank for this model).

Default Pass and Seymour IP Address

Pass and Seymour Model IP Address
CNR-7562V 192.168.1.1

Default Pass and Seymour Username and Password

Pass and Seymour Model Username Password
CNR-7562V blank blank

If the Default Login Doesn't Work

Someone has probably changed the password. Check the label on the router, then factory reset it: with the router on, hold the Reset button (often a pinhole, so use a paperclip) for about 10 to 30 seconds, then let go. That puts back the default login above, and also erases your WiFi and Internet settings. See How To Reset Your Router.

More Than Router Guides

To forward ports on a Pass and Seymour router, see our sister site: Pass and Seymour port forwarding guides on Portforward.com.