How to change the IP Address on a Planet ADN-4100 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Planet ADN-4100 router.

Other Planet ADN-4100 Guides

This is the ip address guide for the Planet ADN-4100. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Planet ADN-4100

To get started configuring the Planet ADN-4100 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Planet ADN-4100, follow our Planet ADN-4100 Login Guide.

Change the LAN IP Address on a Planet ADN-4100

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Planet ADN-4100 router.

After you have decided to change your Router IP Address, the address you can see when inside your network, you need to first log into the Planet ADN-4100. This places you on the Device Info page. Next click the choice labeled Setup, then Local Network.

Configure the LAN section of your Planet ADN-4100

router setup
This is the setup page from your Planet ADN-4100 router.

You should now be on the Local Network page of the Router. Enter your new IP Address you have chosen for your Router in the box labeled Router IP Address. One good choice is the address of 192.168.0.1

Please do not change the Subnet Mask, this should remain at 255.255.255.0

When you have finished, be sure to save before you exit.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Planet ADN-4100 Info

Don't forget about our other Planet ADN-4100 info that you might be interested in.

This is the ip address guide for the Planet ADN-4100. We also have the following guides for the same router: