Reset the Prolink Hurricane 6300GL

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This article covers how to reset the Prolink Hurricane 6300GL router back to factory default settings. This is a much bigger deal than a router reboot. Rebooting a router is simply turning it off and back on again. This is different from a reset because a reset completely erases all settings from the router.

Warning: Proceed with caution; resetting your router can be a major headache. The following settings in your router will be changed:

  • The router's login credentials are reset.
  • All WiFi login information and network names are reset.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • All port forwards, firewall settings, and parental controls that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Prolink Hurricane 6300GL Guides

This is the reset router guide for the Prolink Hurricane 6300GL. We also have the following guides for the same router:

Recover Password in Prolink Hurricane 6300GL

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.

Reset the Prolink Hurricane 6300GL

Most of the time you can find a small reset button located on either the back or the bottom of a router. Most reset buttons look like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Hold the reset button down for 10 seconds and watch the lights. After a few seconds the lights should blink differently. When this happens, the reset is complete. Do not be concerned about holding the reset button down too long. It will not hurt anything.

Keep in mind that this will completely reset your Prolink Hurricane 6300GL router.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the Prolink Hurricane 6300GL

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. Our Hurricane 6300GL Login Guide has all of the information that you need.

Change Your Password

Be sure to change your router's default password after you get logged back in. It's a very bad idea to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other Prolink Hurricane 6300GL Guides

If you want additional help with your Prolink Hurricane 6300GL be sure to check out some of our other guides.

This is the reset router guide for the Prolink Hurricane 6300GL. We also have the following guides for the same router: