How to change the IP Address on a Quicktel QAR367E4W router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Quicktel QAR367E4W router.

Other Quicktel QAR367E4W Guides

This is the ip address guide for the Quicktel QAR367E4W.We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Quicktel QAR367E4W

To get started configuring the Quicktel QAR367E4W LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Quicktel QAR367E4W, follow our Quicktel QAR367E4W Login Guide.

Change the LAN IP Address on a Quicktel QAR367E4W

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Quicktel router.

Once logged into the Quicktel QAR367E4W you should see the Device Info page of your Router. To change your LAN IP Address, the address you see from inside the network, click the choice on the left side of your screen labeled Advanced Setup. This opens more choices below this, choose LAN.

Configure the LAN section of your Quicktel QAR367E4W

router setup
This is the setup page from your Quicktel router.

You are now on the correct page. Place your cursor in the box marked IP Address, it will be the very first box. Enter your new address you have picked out for your Router. One possible suggestion is the address of 192.168.1.1

While making this change to your Router, please do not change the Subnet Mask, that should be left at 255.255.255.0

When you have finished making this change, click the button labeled Save/Reboot.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Quicktel QAR367E4W Info

Don't forget about our other Quicktel QAR367E4W info that you might be interested in.

This is the ip address guide for the Quicktel QAR367E4W.We also have the following guides for the same router: