If you need to reset your ReadyNet AC1200MS router back to factory settings, then this article shows you how. Resetting a router is different than rebooting a router. Unplugging a router from the wall reboots it. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: Make sure that you fully understand the following before resetting your router. When you reset your router, the following will happen.
- The router's login credentials are reset to factory defaults.
- All WiFi information such as network name, password, and authentication method are erased.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any port forwards, firewall settings, or parental controls that you have configured will be removed.
Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other ReadyNet AC1200MS Guides
This is the reset router guide for the ReadyNet AC1200MS v3.20. We also have the following guides for the same router:
Recover Password in ReadyNet AC1200MS
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the ReadyNet AC1200MS
Most of the time you can find a small reset button located on either the back or the bottom of a router. What you are looking for is something that looks like this:
Even though yours may look slightly different, you need to look for a tiny button. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. It is harmless to hold the reset button too long.
Just don't forget that this will totally reset your ReadyNet AC1200MS router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the ReadyNet AC1200MS
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. Just follow our AC1200MS Login Guide to find all of the information that you need.
Change Your Password
Do not forget to change your router's default password when you log back into it. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other ReadyNet AC1200MS Guides
If you want additional help with your ReadyNet AC1200MS be sure to check out some of our other guides.
This is the reset router guide for the ReadyNet AC1200MS v3.20. We also have the following guides for the same router: