This page shows how to change the LAN IP Address on the ReadyNet WRT300N router.
Other ReadyNet WRT300N Guides
This is the ip address guide for the ReadyNet WRT300N. We also have the following guides for the same router:
- ReadyNet WRT300N - ReadyNet WRT300N Login Instructions
- ReadyNet WRT300N - ReadyNet WRT300N User Manual
- ReadyNet WRT300N - How to change the DNS settings on a ReadyNet WRT300N router
- ReadyNet WRT300N - Setup WiFi on the ReadyNet WRT300N
- ReadyNet WRT300N - ReadyNet WRT300N Screenshots
- ReadyNet WRT300N - Information About the ReadyNet WRT300N Router
- ReadyNet WRT300N - Reset the ReadyNet WRT300N
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The ReadyNet WRT300N
To get started configuring the ReadyNet WRT300N LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the ReadyNet WRT300N, follow our ReadyNet WRT300N Login Guide.
Change the LAN IP Address on a ReadyNet WRT300N
If you followed our login guide above then you should see this screen.

Once you've logged into the ReadyNet WRT300N router you should be taken to the Home page. To change your router's IP address click the Setup tab near the top of the page. From there click Local Network in the left hand sidebar.
Configure the LAN section of your ReadyNet WRT300N

You should be brought to the page shown above.
This page allows you to change your IP Address. Enter your desired address into the given box. If you're not sure what you should change it to, try 10.0.0.1
Below that you'll see the Subnet Mask. However, it's important to know that this needs to be left alone. Be sure to leave it at 255.255.255.0
Congratulations! That's it. Just don't forget to click the little Apply Changes button before closing the page.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other ReadyNet WRT300N Info
Don't forget about our other ReadyNet WRT300N info that you might be interested in.
This is the ip address guide for the ReadyNet WRT300N. We also have the following guides for the same router:
- ReadyNet WRT300N - ReadyNet WRT300N Login Instructions
- ReadyNet WRT300N - ReadyNet WRT300N User Manual
- ReadyNet WRT300N - How to change the DNS settings on a ReadyNet WRT300N router
- ReadyNet WRT300N - Setup WiFi on the ReadyNet WRT300N
- ReadyNet WRT300N - ReadyNet WRT300N Screenshots
- ReadyNet WRT300N - Information About the ReadyNet WRT300N Router
- ReadyNet WRT300N - Reset the ReadyNet WRT300N