This page shows how to change the LAN IP Address on the Sagem Fast 2000 router.
Other Sagem Fast 2000 Guides
This is the ip address guide for the Sagem Fast 2000. We also have the following guides for the same router:
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Sagem Fast 2000
To get started configuring the Sagem Fast 2000 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Sagem Fast 2000, follow our Sagem Fast 2000 Login Guide.
Change the LAN IP Address on a Sagem Fast 2000
If you followed our login guide above then you should see this screen.
Once you have decided to change your Router IP Address, the address you can see from inside your local network, first log into the Sagem Fast 2000. This places you on the Home page of your Router. Next, click the choice at the top of the page, in purple, labeled Setup. Then, click the choice on the left labeled LAN Configuration and on the right Configure next to LAN Group 1.
Configure the LAN section of your Sagem Fast 2000
You should now be on the IP Settings page of your Router. In the box labeled IP Address under the bullet marked Use the following Static IP address enter the new address you have picked for your Router. One good choice is the address of 192.168.0.1
Please leave the Subnet Mask at 255.255.255.0
Make sure that you also leave the bullet marked that reads Enable DHCP Server. This allows the Router to automatically pick from a pool of addresses when needed.
When you have finished, make sure to click Apply before exiting.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Sagem Fast 2000 Info
Don't forget about our other Sagem Fast 2000 info that you might be interested in.
This is the ip address guide for the Sagem Fast 2000. We also have the following guides for the same router: