This page shows how to change the LAN IP Address on the Sagem Fast 2444 router.
Other Sagem Fast 2444 Guides
This is the ip address guide for the Sagem Fast 2444. We also have the following guides for the same router:
- Sagem Fast 2444 - Reset the Sagem Fast 2444
- Sagem Fast 2444 - Sagem Fast 2444 User Manual
- Sagem Fast 2444 - Sagem Fast 2444 Login Instructions
- Sagem Fast 2444 - How to change the DNS settings on a Sagem Fast 2444 router
- Sagem Fast 2444 - Information About the Sagem Fast 2444 Router
- Sagem Fast 2444 - Sagem Fast 2444 Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Sagem Fast 2444
To get started configuring the Sagem Fast 2444 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Sagem Fast 2444, follow our Sagem Fast 2444 Login Guide.
Change the LAN IP Address on a Sagem Fast 2444
If you followed our login guide above then you should see this screen.
When you have finished logging into the Sagem Fast 2444 you should begin on the Summary page of this Router. To change your Local IP Address, the address you see when inside your local network, click the choice on the left hand side of the page labeled Advanced Setup, then LAN.
Configure the LAN section of your Sagem Fast 2444
This new page, called Local Area Network (LAN) Setup is the correct page to be on in order to change your Router IP Address. Place your cursor in the box labeled IP Address and enter the new address you have chosen for your Router. A good choice is 192.168.0.1
While doing this, please be sure that you leave the Subnet Mask at 255.255.255.0
When you are finished making this change, be sure to save.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Sagem Fast 2444 Info
Don't forget about our other Sagem Fast 2444 info that you might be interested in.
This is the ip address guide for the Sagem Fast 2444. We also have the following guides for the same router:
- Sagem Fast 2444 - Reset the Sagem Fast 2444
- Sagem Fast 2444 - Sagem Fast 2444 User Manual
- Sagem Fast 2444 - Sagem Fast 2444 Login Instructions
- Sagem Fast 2444 - How to change the DNS settings on a Sagem Fast 2444 router
- Sagem Fast 2444 - Information About the Sagem Fast 2444 Router
- Sagem Fast 2444 - Sagem Fast 2444 Screenshots