This guide shows you how to reset your Sagem Fast 2604 Topnet router to factory default settings. A router reset is very different than a router reboot. Every time your router loses power it reboots. A Router Reset completely erases the router and returns it to factory settings.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. A router reset will affect the following settings:
- The router's login credentials are reset to factory defaults.
- All WiFi settings are reset, including network name and password.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any firewall settings, parental controls, and port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other Sagem Fast 2604 Topnet Guides
This is the reset router guide for the Sagem Fast 2604 Topnet. We also have the following guides for the same router:
Recover Password in Sagem Fast 2604 Topnet
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Recover Lost or Forgotten Router Passwords
A router reset should be the last thing you try if you are unable to login.
Reset the Sagem Fast 2604 Topnet
On most routers you can find a small button on the back or the bottom labeled reset. Look for something that looks like this:
Reset buttons are usually tiny. Yours may look slightly different than this. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. You can hold the button down as long as you like, it will not hurt anything.
Remember, this will totally reset your Sagem Fast 2604 Topnet router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the Sagem Fast 2604 Topnet
Now you need to log in using the factory default username and password. You can find all of the information that you need in our Fast 2604 Topnet Login Guide.
Change Your Password
After logging in, you should really change your router's password for added security. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other Sagem Fast 2604 Topnet Guides
If you want additional help with your Sagem Fast 2604 Topnet be sure to check out some of our other guides.
This is the reset router guide for the Sagem Fast 2604 Topnet. We also have the following guides for the same router: