The Sagem Fast 4320 router is considered a wireless router because it offers WiFi connectivity. WiFi, or simply wireless, allows you to connect various devices to your router, such as wireless printers, smart televisions, and WiFi enabled smartphones.
Other Sagem Fast 4320 Guides
This is the wifi guide for the Sagem Fast 4320. We also have the following guides for the same router:
WiFi Terms
Before we get started there is a little bit of background info that you should be familiar with.
Wireless Name
Your wireless network needs to have a name to uniquely identify it from other wireless networks. If you are not sure what this means we have a guide explaining what a wireless name is that you can read for more information.
Wireless Password
An important part of securing your wireless network is choosing a strong password.
Wireless Channel
Picking a WiFi channel is not always a simple task. Be sure to read about WiFi channels before making the choice.
Encryption
You should almost definitely pick WPA2 for your networks encryption. If you are unsure, be sure to read our WEP vs WPA guide first.
Login To The Sagem Fast 4320
To get started configuring the Sagem Fast 4320 WiFi settings you need to login to your router. If you are already logged in you can skip this step.
To login to the Sagem Fast 4320, follow our Sagem Fast 4320 Login Guide.
Find the WiFi Settings on the Sagem Fast 4320
If you followed our login guide above then you should see this screen.
Our wireless setup guide for the Sagem Fast 4320 router starts on the Device Info page. To begin configuring your wireless settings, click Wireless on the left hand side of the page and then Basic below that.
Change the WiFi Settings on the Sagem Fast 4320
This takes you to the page you see above.
Start by setting an SSID. This will be your network identification and can be whatever you like. However, we recommend avoiding any kind of personal information due to security reasons. For more on this subject, check out our Wireless Names Guide.
Be sure to click Apply/Save when you're happy with this change.
Now click Security on the left hand side of the page.
Start by scrolling down until you come to the Manual Setup AP heading.
Open the drop down menu labeled Select SSID and choose the SSID you just created.
Now, set the Network Authentication to WPA2 -PSK. To learn why this is the best option, take a look at our WEP vs. WPA Guide.
Next, enter your desired passphrase into the box labeled WPA/WAPI passphrase. A strong passphrase can be difficult to come up with on your own, so we've created a Choosing a Strong Password Guide to help you out.
Finally, set the WPA/WAPI Encryption to AES.
That's all there is to it. Just be sure to click Apply/Save before leaving the page.
Possible Problems when Changing your WiFi Settings
After making these changes to your router you will almost definitely have to reconnect any previously connected devices. This is usually done at the device itself and not at your computer.
Other Sagem Fast 4320 Info
Don't forget about our other Sagem Fast 4320 info that you might be interested in.
This is the wifi guide for the Sagem Fast 4320. We also have the following guides for the same router: