Reset the Sagem Livebox-2

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This is the reset guide for the Sagem Livebox-2 router. Resetting a router is different than rebooting a router. A reboot happens every time a router loses power. This is different from a reset because a reset completely erases all settings from the router.

Warning: Before you proceed, there are a few things you need to know. When you reset your router, the following will happen.

  • The router's login and password are reset.
  • All WiFi settings are reset, including network name and password.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • Any firewall settings, parental controls, and port forwards that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Sagem Livebox-2 Guides

This is the reset router guide for the Sagem Livebox-2. We also have the following guides for the same router:

Recover Password in Sagem Livebox-2

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the Sagem Livebox-2

On most routers you can find a small button on the back or the bottom labeled reset. What you are looking for is something that looks like this:

Router Reset Button

Reset buttons are usually tiny. Yours may look slightly different than this. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Remember, this will totally reset your Sagem Livebox-2 router.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the Sagem Livebox-2

Now you need to log in using the factory default username and password. You can find all of the information that you need in our Livebox-2 Login Guide.

Change Your Password

You need to change your router's default password after you log in for the first time. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: Write your new password down on a post-it note and stick it to the bottom of your router.

Other Sagem Livebox-2 Guides

If you want additional help with your Sagem Livebox-2 be sure to check out some of our other guides.

This is the reset router guide for the Sagem Livebox-2. We also have the following guides for the same router: