This guide shows you how to reset your Sagemcom 2704N Plusnet router. Resetting a router is different than rebooting a router. Every time your router loses power it reboots. However, when you reset a router you, return it back to its factory default settings.
Warning: Proceed with caution; resetting your router can be a major headache. A router reset will affect the following settings:
- The router's login and password are reset to factory defaults.
- All WiFi settings are reset, including network name and password.
- All ISP settings will reset to default, and you may have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Sagemcom 2704N Plusnet Guides
This is the reset router guide for the Sagemcom 2704N Plusnet. We also have the following guides for the same router:
Recover Password in Sagemcom 2704N Plusnet
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the Sagemcom 2704N Plusnet
You can usually find a small reset button on either the back or the bottom of a router. This is what a typical reset button looks like:
Yours may look slightly different, but they are usually tiny. You may need a paper clip to push the reset button.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. After a few seconds the lights should blink differently. When this happens, the reset is complete. It is harmless to hold the reset button too long.
Don't forget, this step will totally reset your Sagemcom 2704N Plusnet router back to factory settings.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Sagemcom 2704N Plusnet
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can follow the 2704N Plusnet Login Guide to find everything that you need to log in.
Change Your Password
Do not forget to change your router's default password when you log back into it. Leaving a router password set to default is a very serious security risk. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other Sagemcom 2704N Plusnet Guides
This isn't our only Sagemcom 2704N Plusnet guide. We also have the following guides for this router.
This is the reset router guide for the Sagemcom 2704N Plusnet. We also have the following guides for the same router: