This page shows how to change the LAN IP Address on the Sagemcom Fast 3284 router.
Other Sagemcom Fast 3284 Guides
This is the ip address guide for the Sagemcom Fast 3284. We also have the following guides for the same router:
- Sagemcom Fast 3284 - Sagemcom Fast 3284 Login Instructions
- Sagemcom Fast 3284 - Sagemcom Fast 3284 User Manual
- Sagemcom Fast 3284 - Setup WiFi on the Sagemcom Fast 3284
- Sagemcom Fast 3284 - Sagemcom Fast 3284 Screenshots
- Sagemcom Fast 3284 - Information About the Sagemcom Fast 3284 Router
- Sagemcom Fast 3284 - Reset the Sagemcom Fast 3284
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Sagemcom Fast 3284
To get started configuring the Sagemcom Fast 3284 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Sagemcom Fast 3284, follow our Sagemcom Fast 3284 Login Guide.
Change the LAN IP Address on a Sagemcom Fast 3284
If you followed our login guide above then you should see this screen.
This guide begins on the Status page of the Sagemcom Fast 3284 router. Want to change your IP address? Start off by clicking Basic near the top of the page. From there click Setup in the left hand sidebar.
Configure the LAN section of your Sagemcom Fast 3284
You should be brought to the page you see above.
This page allows you to change your router's IP Address. Enter your new address into the provided box. Not sure what you should change it to? One good option is 10.0.0.1
Congratulations! That's all there is to it. Just be sure to save your changes before closing the page.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Sagemcom Fast 3284 Info
Don't forget about our other Sagemcom Fast 3284 info that you might be interested in.
This is the ip address guide for the Sagemcom Fast 3284. We also have the following guides for the same router:
- Sagemcom Fast 3284 - Sagemcom Fast 3284 Login Instructions
- Sagemcom Fast 3284 - Sagemcom Fast 3284 User Manual
- Sagemcom Fast 3284 - Setup WiFi on the Sagemcom Fast 3284
- Sagemcom Fast 3284 - Sagemcom Fast 3284 Screenshots
- Sagemcom Fast 3284 - Information About the Sagemcom Fast 3284 Router
- Sagemcom Fast 3284 - Reset the Sagemcom Fast 3284