If you need to reset your Sagemcom Fast 3864V3AC router back to factory settings, then this article shows you how. A router reset is very different than a router reboot. Rebooting a router is simply turning it off and back on again. This is different from a reset because a reset completely erases all settings from the router.
Warning: Make sure that you fully understand the following before resetting your router. The following settings will be changed in your router:
- The router's username and password are reset.
- All WiFi login information and network names are reset.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- Any firewall settings, parental controls, and port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Sagemcom Fast 3864V3AC Guides
This is the reset router guide for the Sagemcom Fast 3864V3AC 10.96 Optus. We also have the following guides for the same router:
Recover Password in Sagemcom Fast 3864V3AC
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the Sagemcom Fast 3864V3AC
You can usually find a small reset button on either the back or the bottom of a router. Most reset buttons look like this:
Reset buttons are usually tiny. Yours may look slightly different than this. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Remember, this will erase everything you have previously done to this Sagemcom Fast 3864V3AC router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the Sagemcom Fast 3864V3AC
Once the reset is complete, you need to login to your router using the default IP address, username, and password. You can follow the Fast 3864V3AC Login Guide to find everything that you need to log in.
Change Your Password
Do not forget to change your router's default password when you log back into it. The factory default passwords for routers are very well known. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other Sagemcom Fast 3864V3AC Guides
Here are some of our other Sagemcom Fast 3864V3AC guides that you might be interested in.
This is the reset router guide for the Sagemcom Fast 3864V3AC 10.96 Optus. We also have the following guides for the same router: