This guide shows you how to reset your Sagemcom Fast 4315NHP router to factory default settings. Resetting a router is different than rebooting a router. Unplugging a router from the wall reboots it. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. When you reset your router, the following will happen.
- The router's username and password are reset.
- Your WiFi name and password are reset.
- Any ISP settings saved in your router will be removed. You may have to contact your ISP.
- Any firewall settings, parental controls, and port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router you may want to try recovering your router password with our Router Password Finder.
Other Sagemcom Fast 4315NHP Guides
This is the reset router guide for the Sagemcom Fast 4315NHP. We also have the following guides for the same router:
Recover Password in Sagemcom Fast 4315NHP
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the Sagemcom Fast 4315NHP
There is usually a small reset button located on either the back or the bottom of a router. A typical reset button looks like this:
Yours may look slightly different, but they are usually tiny. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Keep in mind that this will completely reset your Sagemcom Fast 4315NHP router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Sagemcom Fast 4315NHP
Once the reset is complete, you need to login to your router using the default IP address, username, and password. You can find all of the information that you need in our Fast 4315NHP Login Guide.
Change Your Password
Do not forget to change your router's default password when you log back into it. Leaving a router password set to default is a very serious security risk. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other Sagemcom Fast 4315NHP Guides
Here are some of our other Sagemcom Fast 4315NHP guides that you might be interested in.
This is the reset router guide for the Sagemcom Fast 4315NHP. We also have the following guides for the same router: