If you need to reset your Sagemcom Fast 4360 Air router back to factory settings, then this article shows you how. A router reset is very different than a router reboot. Unplugging a router from the wall reboots it. However, when you reset a router you, return it back to its factory default settings.
Warning: Proceed with caution; resetting your router can be a major headache. A router reset will affect the following settings:
- The router's username and password are reset to factory defaults.
- Your WiFi name and password are reset.
- Any ISP settings saved in your router will be removed. You may have to contact your ISP.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Sagemcom Fast 4360 Air Guides
This is the reset router guide for the Sagemcom Fast 4360 Air SG4J000094C KPN. We also have the following guides for the same router:
Recover Password in Sagemcom Fast 4360 Air
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Recover Lost or Forgotten Router Passwords
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the Sagemcom Fast 4360 Air
Most of the time you can find a small reset button located on either the back or the bottom of a router. A typical reset button looks like this:
Yours may look slightly different, but they are usually tiny. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Remember, this will totally reset your Sagemcom Fast 4360 Air router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Sagemcom Fast 4360 Air
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. Our Fast 4360 Air Login Guide has all of the information that you need.
Change Your Password
Be sure to change your router's default password after you get logged back in. Leaving a router password set to default is a very serious security risk. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other Sagemcom Fast 4360 Air Guides
If you want additional help with your Sagemcom Fast 4360 Air be sure to check out some of our other guides.
This is the reset router guide for the Sagemcom Fast 4360 Air SG4J000094C KPN. We also have the following guides for the same router: