This article covers how to reset the Sagemcom Fast 5355 router back to factory default settings. Resetting a router is different than rebooting a router. Every time your router loses power it reboots. This is different from a reset because a reset completely erases all settings from the router.
Warning: Make sure that you fully understand the following before resetting your router. The following settings in your router will be changed:
- The router's username and password are reset to factory defaults.
- Your WiFi login, password, and network name are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any port forwards, firewall settings, or parental controls that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router you may want to try recovering your router password with our Router Password Finder.
Other Sagemcom Fast 5355 Guides
This is the reset router guide for the Sagemcom Fast 5355 SG7E10001332 Telstra. We also have the following guides for the same router:
- Sagemcom Fast 5355 Telstra - Reset the Sagemcom Fast 5355
- Sagemcom Fast 5355 Telstra - Sagemcom Fast 5355 Login Instructions
- Sagemcom Fast 5355 Telstra - Sagemcom Fast 5355 Screenshots
- Sagemcom Fast 5355 Telstra - Information About the Sagemcom Fast 5355 Router
Recover Password in Sagemcom Fast 5355
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the Sagemcom Fast 5355
Usually there is a reset button located on the back or bottom of a router. This is what a typical reset button looks like:
Yours may look slightly different, but they are usually tiny. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Hold the reset button down for 10 seconds and watch the lights. The blinking pattern of the lights on the front of the router should change when the reset is complete. You can hold the button down as long as you like, it will not hurt anything.
Remember, this will erase everything you have previously done to this Sagemcom Fast 5355 router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the Sagemcom Fast 5355
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Just follow our Fast 5355 Login Guide to find all of the information that you need.
Change Your Password
Do not forget to change your router's default password when you log back into it. The factory default passwords for routers are very well known. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other Sagemcom Fast 5355 Guides
We have collected a lot of information about the Sagemcom Fast 5355 router. You can find some of our additional content here.
This is the reset router guide for the Sagemcom Fast 5355 SG7E10001332 Telstra. We also have the following guides for the same router:
- Sagemcom Fast 5355 Telstra - Reset the Sagemcom Fast 5355
- Sagemcom Fast 5355 Telstra - Sagemcom Fast 5355 Login Instructions
- Sagemcom Fast 5355 Telstra - Sagemcom Fast 5355 Screenshots
- Sagemcom Fast 5355 Telstra - Information About the Sagemcom Fast 5355 Router