This guide shows you how to reset your Sagemcom Fast 5366 router. This is not the same thing as rebooting a router. Turning a router off and back on again causes a reboot. This is different from a reset because a reset completely erases all settings from the router.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. A router reset will affect the following settings:
- The router's login credentials are reset to factory defaults.
- All WiFi settings are reset, including network name and password.
- Any ISP settings saved in your router will be removed. You may have to contact your ISP.
- Any firewall settings, parental controls, and port forwards that you have configured will be removed.
Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Sagemcom Fast 5366 Guides
This is the reset router guide for the Sagemcom Fast 5366 SG4N10003006 SÃÂminn. We also have the following guides for the same router:
- Sagemcom Fast 5366 SG4610000101 MyRepublic - Sagemcom Fast 5366 Screenshots
- Sagemcom Fast 5366 SG4610000101 MyRepublic - Reset the Sagemcom Fast 5366
- Sagemcom Fast 5366 SG4610000101 MyRepublic - Information About the Sagemcom Fast 5366 Router
- Sagemcom Fast 5366 SG4610000101 MyRepublic - Login to the Sagemcom Fast 5366
Recover Password in Sagemcom Fast 5366
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Recover Lost or Forgotten Router Passwords
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the Sagemcom Fast 5366
Usually there is a reset button located on the back or bottom of a router. A typical reset button looks like this:
Even though yours may look slightly different, you need to look for a tiny button. You may need a paper clip to push the reset button.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. It is harmless to hold the reset button too long.
Remember, this will totally reset your Sagemcom Fast 5366 router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the Sagemcom Fast 5366
Once the reset is complete, you need to login to your router using the default IP address, username, and password. We have a Fast 5366 Login Guide with all this information ready for you.
Change Your Password
After logging in, you should really change your router's password for added security. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other Sagemcom Fast 5366 Guides
If you want additional help with your Sagemcom Fast 5366 be sure to check out some of our other guides.
This is the reset router guide for the Sagemcom Fast 5366 SG4N10003006 SÃÂminn. We also have the following guides for the same router:
- Sagemcom Fast 5366 SG4610000101 MyRepublic - Sagemcom Fast 5366 Screenshots
- Sagemcom Fast 5366 SG4610000101 MyRepublic - Reset the Sagemcom Fast 5366
- Sagemcom Fast 5366 SG4610000101 MyRepublic - Information About the Sagemcom Fast 5366 Router
- Sagemcom Fast 5366 SG4610000101 MyRepublic - Login to the Sagemcom Fast 5366