This guide shows you how to reset your Sagemcom Fast 5656 router. A router reset is very different than a router reboot. Turning a router off and back on again causes a reboot. A Router Reset completely erases the router and returns it to factory settings.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings will be changed in your router:
- The router's username and password are reset to factory defaults.
- All WiFi login information and network names are reset.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Sagemcom Fast 5656 Guides
This is the reset router guide for the Sagemcom Fast 5656 Orange. We also have the following guides for the same router:
Recover Password in Sagemcom Fast 5656
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the Sagemcom Fast 5656
You can usually find a small reset button on either the back or the bottom of a router. Look for something that looks like this:
Your reset button may look different, but usually they are very small. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Keep in mind that this will completely reset your Sagemcom Fast 5656 router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Sagemcom Fast 5656
Once the reset is complete, you need to login to your router using the default IP address, username, and password. You can find all of the information that you need in our Fast 5656 Login Guide.
Change Your Password
After logging in, you should really change your router's password for added security. It's a very bad idea to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other Sagemcom Fast 5656 Guides
Here are some of our other Sagemcom Fast 5656 guides that you might be interested in.
This is the reset router guide for the Sagemcom Fast 5656 Orange. We also have the following guides for the same router: