In this article, you will learn how to reset your Sagemcom Fast 5689E back to factory settings. A router reset is a much bigger deal than a router reboot. Every time your router loses power it reboots. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: Before you continue, there are a few things you need to know. The following settings will be changed in your router:
- The router's login and password are reset to factory defaults.
- All WiFi information such as network name, password, and authentication method are erased.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- Any port forwards, firewall settings, or parental controls that you have configured will be removed.
Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Sagemcom Fast 5689E Guides
This is the reset router guide for the Sagemcom Fast 5689E 1.13 Bell. We also have the following guides for the same router:
Recover Password in Sagemcom Fast 5689E
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Recover Lost or Forgotten Router Passwords
A router reset should be the last thing you try if you are unable to login.
Reset the Sagemcom Fast 5689E
On most routers you can find a small button on the back or the bottom labeled reset. Look at your router and try to find something that looks like this:
Yours may look slightly different, but they are usually tiny. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. The lights on the front of the router should do something different when the reset happens. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Just don't forget that this will totally reset your Sagemcom Fast 5689E router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Sagemcom Fast 5689E
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. We have a Fast 5689E Login Guide with all this information ready for you.
Change Your Password
Be sure to change your router's default password after you get logged back in. It is a huge security risk to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other Sagemcom Fast 5689E Guides
Here are some of our other Sagemcom Fast 5689E guides that you might be interested in.
This is the reset router guide for the Sagemcom Fast 5689E 1.13 Bell. We also have the following guides for the same router: