Setup Router logo in white Setup router name logo in white
Get Software

Reset the Samsung SMT-67400-XEN

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

In this article, you will learn how to reset your Samsung SMT-67400-XEN back to factory settings. Resetting a router is different than rebooting a router. Unplugging a router from the wall reboots it. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: Before you proceed, there are a few things you need to know. When you reset your router, the following will happen.

  • The router's login credentials are reset.
  • Your WiFi name and password are reset.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • All parental controls, firewall settings, and port forwards will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Samsung SMT-67400-XEN Guides

This is the reset router guide for the Samsung SMT-67400-XEN. We also have the following guides for the same router:

Recover Password in Samsung SMT-67400-XEN

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

If you are unable to recover your lost router password, then you may have to proceed with a full router reset.

Reset the Samsung SMT-67400-XEN

Usually there is a reset button located on the back or bottom of a router. Most reset buttons look like this:

Router Reset Button

Your reset button may look different, but usually they are very small. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Hold the reset button down for about 10 seconds while watching the lights on the front of your router. The blinking pattern of the lights on the front of the router should change when the reset is complete. You can hold the button down as long as you like, it will not hurt anything.

Just don't forget that this will totally reset your Samsung SMT-67400-XEN router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Samsung SMT-67400-XEN

Now you need to log in using the factory default username and password. We have a SMT-67400-XEN Login Guide with all this information ready for you.

Change Your Password

Do not forget to change your router's default password when you log back into it. Leaving a router password set to default is a very serious security risk. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Write your new password down on a post-it note and stick it to the bottom of your router.

Other Samsung SMT-67400-XEN Guides

If you want additional help with your Samsung SMT-67400-XEN be sure to check out some of our other guides.

This is the reset router guide for the Samsung SMT-67400-XEN. We also have the following guides for the same router: