This guide shows you how to reset your SerComm AG Combo VD625 router to factory default settings. This is not the same thing as rebooting a router. Every time your router loses power it reboots. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: Make sure that you fully understand the following before resetting your router. A router reset will affect the following settings:
- The router's login credentials are reset to factory defaults.
- Your WiFi name and password are reset.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other SerComm AG Combo VD625 Guides
This is the reset router guide for the SerComm AG Combo VD625 AGTOT_2.0.0 TIM. We also have the following guides for the same router:
Recover Password in SerComm AG Combo VD625
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the SerComm AG Combo VD625
Most routers have a small button on either the back or the bottom. A typical reset button looks like this:
Your reset button may look different, but usually they are very small. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. The blinking pattern of the lights on the front of the router should change when the reset is complete. You can hold the button down as long as you like, it will not hurt anything.
Remember, this will totally reset your SerComm AG Combo VD625 router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the SerComm AG Combo VD625
Now you need to log in using the factory default username and password. You can find all of the information that you need in our AG Combo VD625 Login Guide.
Change Your Password
After logging in, you should really change your router's password for added security. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other SerComm AG Combo VD625 Guides
This isn't our only SerComm AG Combo VD625 guide. We also have the following guides for this router.
This is the reset router guide for the SerComm AG Combo VD625 AGTOT_2.0.0 TIM. We also have the following guides for the same router: