This guide shows you how to reset your SerComm NB6V-FXC-r0 router to factory default settings. Resetting a router is different than rebooting a router. Every time your router loses power it reboots. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: This is not a step to be taken lightly. A router reset will affect the following settings:
- The router's login credentials are reset to factory defaults.
- All WiFi information such as network name, password, and authentication method are erased.
- Any ISP settings saved in your router will be removed. You may have to contact your ISP.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other SerComm NB6V-FXC-r0 Guides
This is the reset router guide for the SerComm NB6V-FXC-r0 R3.5.8 (FR) SFR. We also have the following guides for the same router:
Recover Password in SerComm NB6V-FXC-r0
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
A router reset should be the last thing you try if you are unable to login.
Reset the SerComm NB6V-FXC-r0
Usually there is a reset button located on the back or bottom of a router. Look for something that looks like this:
Your reset button may look different, but usually they are very small. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Remember, this will totally reset your SerComm NB6V-FXC-r0 router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the SerComm NB6V-FXC-r0
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Just follow our NB6V-FXC-r0 Login Guide to find all of the information that you need.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other SerComm NB6V-FXC-r0 Guides
Here are some of our other SerComm NB6V-FXC-r0 guides that you might be interested in.
This is the reset router guide for the SerComm NB6V-FXC-r0 R3.5.8 (FR) SFR. We also have the following guides for the same router: