In this article, you will learn how to reset your SerComm NB6VAC-FXC-r0 back to factory settings. This is not the same thing as rebooting a router. Unplugging a router from the wall reboots it. This is different from a reset because a reset completely erases all settings from the router.
Warning: Proceed with caution; resetting your router can be a major headache. A router reset will affect the following settings:
- The router's username and password are reset.
- All WiFi information such as network name, password, and authentication method are erased.
- Any ISP settings saved in your router will be removed. You may have to contact your ISP.
- Any parental controls, firewall settings, or port forwards will be removed.
Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other SerComm NB6VAC-FXC-r0 Guides
This is the reset router guide for the SerComm NB6VAC-FXC-r0 R4.0.45d (FR) SFR. We also have the following guides for the same router:
Recover Password in SerComm NB6VAC-FXC-r0
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the SerComm NB6VAC-FXC-r0
On most routers you can find a small button on the back or the bottom labeled reset. What you are looking for is something that looks like this:
Yours may look slightly different, but they are usually tiny. You may need a paper clip to push the reset button.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. Do not worry about holding the button down too long; this is harmless.
Keep in mind that this will completely reset your SerComm NB6VAC-FXC-r0 router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the SerComm NB6VAC-FXC-r0
Once the reset is complete, you need to login to your router using the default IP address, username, and password. You can find all of the information that you need in our NB6VAC-FXC-r0 Login Guide.
Change Your Password
Do not forget to change your router's default password when you log back into it. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other SerComm NB6VAC-FXC-r0 Guides
This isn't our only SerComm NB6VAC-FXC-r0 guide. We also have the following guides for this router.
This is the reset router guide for the SerComm NB6VAC-FXC-r0 R4.0.45d (FR) SFR. We also have the following guides for the same router: