Setup Router logo in white Setup router name logo in white
Get Software

Reset the Shenzhen Gongjin Electronics SpeedSurf 904V-N PLDT

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This is the reset guide for the Shenzhen Gongjin Electronics SpeedSurf 904V-N PLDT router. A router reset is very different than a router reboot. Unplugging a router from the wall reboots it. However, when you reset a router you, return it back to its factory default settings.

Warning: Make sure that you fully understand the following before resetting your router. The following settings will be changed in your router:

  • The router's login and password are reset to factory defaults.
  • All WiFi settings are reset, including network name and password.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Shenzhen Gongjin Electronics SpeedSurf 904V-N PLDT Guides

This is the reset router guide for the Shenzhen Gongjin Electronics SpeedSurf 904V-N PLDT. We also have the following guides for the same router:

Recover Password in Shenzhen Gongjin Electronics SpeedSurf 904V-N PLDT

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the Shenzhen Gongjin Electronics SpeedSurf 904V-N PLDT

On most routers you can find a small button on the back or the bottom labeled reset. Look at your router and try to find something that looks like this:

Router Reset Button

Reset buttons are usually tiny. Yours may look slightly different than this. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Watch the front panel lights while you hold the reset button down for at least 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Keep in mind that this will completely reset your Shenzhen Gongjin Electronics SpeedSurf 904V-N PLDT router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Shenzhen Gongjin Electronics SpeedSurf 904V-N PLDT

Now you need to log in using the factory default username and password. Our SpeedSurf 904V-N PLDT Login Guide has all of the information that you need.

Change Your Password

Be sure to change your router's default password after you get logged back in. Leaving a router password set to default is a very serious security risk. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.

Other Shenzhen Gongjin Electronics SpeedSurf 904V-N PLDT Guides

Here are some of our other Shenzhen Gongjin Electronics SpeedSurf 904V-N PLDT guides that you might be interested in.

This is the reset router guide for the Shenzhen Gongjin Electronics SpeedSurf 904V-N PLDT. We also have the following guides for the same router: