This is the reset guide for the Siemens SE260 router. Resetting a router is different than rebooting a router. Rebooting a router is simply turning it off and back on again. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: This is not a step to be taken lightly. A router reset will affect the following settings:
- The router's username and password are reset to factory defaults.
- All WiFi information such as network name, password, and authentication method are erased.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Siemens SE260 Guides
This is the reset router guide for the Siemens SE260. We also have the following guides for the same router:
Recover Password in Siemens SE260
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
A router reset should be the last thing you try if you are unable to login.
Reset the Siemens SE260
You can usually find a small reset button on either the back or the bottom of a router. This is what a typical reset button looks like:
Your reset button may look different, but usually they are very small. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Just don't forget that this will totally reset your Siemens SE260 router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Siemens SE260
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Our SE260 Login Guide has all of the information that you need.
Change Your Password
You need to change your router's default password after you log in for the first time. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other Siemens SE260 Guides
This isn't our only Siemens SE260 guide. We also have the following guides for this router.
This is the reset router guide for the Siemens SE260. We also have the following guides for the same router: